

Water softener Amii iVISION M
This system is selected based on your water parameters — we will quote a price after a consultation.
Request a quoteDescription
Amii iVISION is a new-generation smart water softener, designed not only to tackle hard water effectively but also to make your entire home plumbing system safer. The unit combines automatic water softening, smart regeneration control, Wi-Fi connectivity, a mobile app, salt level monitoring, and active water leak protection.
iVISION is designed for people who want less limescale, more convenient day-to-day maintenance, and the ability to control their water system remotely. All the key information – water flow, salt level, system status, and alerts – is available on your phone in the Amii iVISION app.
Smart control from your phone
Built-in Wi-Fi and the dedicated Amii iVISION app let you monitor and control the softener remotely.
In the app, you can:
- monitor water flow in real time;
- see the salt level;
- check the control valve status;
- track water consumption statistics;
- change the softener settings;
- configure safety limits;
- receive push notifications and alerts;
- control the system's operation remotely.
This lets you look after practically the entire system without even going over to the unit.
Active water leak protection
One of the most important features of Amii iVISION is built-in flood protection.
When the wireless leak sensor detects water, it sends a signal to the system, and the control valve can automatically shut off the water supply to the building. At the same time, an alert about a possible emergency is sent to your phone.
You can connect up to 5 wireless leak sensors to the system, so you can protect several high-risk areas of your home – for example, the kitchen, bathroom, boiler room, or the area by the washing machine.
Smart anomaly detection
iVISION can monitor not only the external leak sensors but also the water consumption itself.
You can set limits for:
Flow duration – if water runs longer than the set time, the system can automatically shut off the supply.
Flow rate – an unusually high flow may indicate a burst pipe or another serious fault.
Volume of water used – you can set a maximum volume for a single continuous draw.
If the set limits are exceeded, the system can shut off the water supply and send an alert to your phone. This helps reduce the risk of uncontrolled water loss and flooding.
Automatic salt level monitoring
The unit uses a precise ultrasonic salt level sensor that continuously monitors the amount of salt in the tank.
When the salt runs low, you are notified:
- on the unit's display;
- by a push notification in the mobile app.
So there's no need to keep checking the salt tank by hand – the system itself reminds you when it needs refilling.
Economical regeneration based on actual water consumption
Amii iVISION uses volumetric regeneration control, so the regeneration process adapts to your actual water consumption.
The system regenerates the ion exchange media according to real demand, not just on a preset schedule. This helps make more efficient use of:
- the water used for regeneration;
- salt;
- the capacity of the ion exchange media.
The result: fewer unnecessary regenerations and more economical operation of the system.
Holiday Mode for longer trips away
When water isn't used for a long time, it can stagnate in the system. For such cases, iVISION has a special Holiday Mode.
Once it is activated, the system protects the ion exchange media and helps keep the system hygienic during longer periods of non-use. According to the manufacturer, the mode protects the media from microbial growth and the effects of stagnant water.
Convenient controls and touchscreen
iVISION features a modern touch control panel and a motion sensor. The built-in microwave motion sensor can detect a person up to about 2 meters away and automatically wake the display from standby.
This way, the key system data is easy to see without even touching the unit.
Soft water for your whole home
With 12 liters of ion exchange resin, iVISION is designed for whole-house water softening. Its nominal flow rate is 0.8 m³/h.
At a water hardness of 6 meq/l, the system can produce up to 3.8 m³ of softened water between regenerations.
Softening reduces the formation of limescale deposits, so soft water helps:
- protect boilers and water heaters;
- reduce limescale buildup in washing machines and dishwashers;
- protect faucets, shower fixtures, and pipes;
- keep shower glass, sinks, and other surfaces clean more easily;
- get more out of soap, shampoo, and cleaning products.
The manufacturer also highlights that soft water feels nicer on skin and hair and reduces the need for household chemicals.
Keeps working if the Wi-Fi drops
The softening and regeneration processes do not depend on a constant internet connection. The unit has its own electronic controller that performs the core functions autonomously.
So even if the Wi-Fi connection is lost, the water softening system can carry on performing its core functions.
Settings are retained during power outages
The electronic controller has built-in memory protection. If the power goes out, the entered parameters and time settings are saved and remain in the system once power is restored.
Key benefits of Amii iVISION
- Automatic whole-house water softening
- Built-in Wi-Fi
- Control via the Amii iVISION mobile app
- Real-time monitoring of water consumption and flow
- Push notifications to your phone
- Automatic flood protection
- Wireless leak sensor included
- Support for up to 5 leak sensors
- Automatic water shut-off when a hazard is detected
- Limits on flow duration, flow rate, and volume
- Ultrasonic salt level sensor
- Low salt warning
- Regeneration based on actual water consumption
- Holiday Mode to protect the ion exchange media
- Touchscreen control display
- Automatic display wake-up as you approach
- Bypass valve included
- Programmable service reminder
- Untreated water available during regeneration
- Settings retained during power outages
Package contents
The set includes:
- Amii iVISION water softening system;
- 2 connection hoses;
- drain / regeneration water hose;
- power adapter;
- bypass valve;
- wireless water leak alert sensor.
Why choose Amii iVISION?
Amii iVISION is more than a water softener. It is a smart home water management and protection system that combines efficient water softening, remote monitoring, automated maintenance, and water leak protection in a single unit.
It is an especially good choice if you want to protect your home appliances and plumbing from limescale, reduce day-to-day maintenance, and at the same time have smart control of your water system on your phone.
Features
- High quality
- Quiet operation
- Compact design
- Touchscreen
- Blending valve
- Salt level sensor
- External bypass
- Service alert
- Flood protection
- Dry salt tank
- Hard water blending function
- Water supply during regeneration
- Low water consumption for regeneration
- Multilingual menu
Applications
- For home
- For business
Technical specifications
Technical specifications
Dimensions: 650 × 320 × 450 mm
Nominal flow rate: 0.8 m³/h
Softened water volume between regenerations: up to 3.8 m³ at a hardness of 6 meq/l
Ion exchange resin volume: 12 l
Average water consumption per regeneration: <110 l
Average salt consumption per regeneration: <1.8 kg
Water connection: 3/4″
Operating pressure: 1.5–6 bar
Operating temperature: 5–38 °C
Maximum power consumption: 18 W
Power supply: 100–240 V, 50–60 Hz
Control voltage: 12 V / 1.5 A
Menu languages: PL / EN / DE / UA
*Manufacturer's data, based on a water pressure of 3 bar.





